9
TELEPHONE OPERATION
Placing a Call on Hold
1. Press the HOLD Button (figure 7). Your caller will be placed on
hold with gentle, computer-generated music.
2. To resume your call, press HOLD again.
3. You can also use the HOLD function to switch to another extension on the same
telephone line. Simply place the unit on hold, pick up the other telephone, and press the
HOLD button to release the call to the second extension.
Using the Speakerphone
1. Press the SPEAKERPHONE button (figure 8) to either dial out
for a call or answer a call.
2. To hang up in either case, press the button again.
Note:
You can switch between Handset and Speakerphone during conversation:
1. Press the SPEAKERPHONE button, while conversing using Handset.
2. Replace the Handset on the base. While the unit is operating in this mode, the
Speakerphone indicator comes on.
3. Switch back to the Handset at any time simply by lifting it from the base.
Amplify, Hold, Voice-Mail Waiting, and Speakerphone Indicators
Amplify, Hold, Voice-Mail Waiting, and Speakerphone functions are indicated by the red
flasher panel at the front of the phone. The left one-third of the flasher will blink to alert
you that you have voice-mail messages waiting.
Note:
Voice-Mail Waiting indicator must be activated by turning it on using the switch at
the bottom of the phone. Voice-Mail is an optional service. Please check with your local
phone company for more details.
Resetting Phone
To reset phone to the factory default settings, insert small pin into the hole on the back of
the phone marked RESET, press and hold for 5 seconds.
Figure 7
Figure 8
