Dismantling
Operating_Manual_Fan_KXE_04_en.docx
119 / 128
Dismantling of the fan may be necessary for the following
reasons:
- Relocation to another installation site
- Replacement with a new fan
- Scrapping
Close the duct work which was connected to the fan.
All work on the fan must be carried out exclusively by
competent persons with the fan switched off and the
impeller at a complete standstill.
All tasks on the electrical connections may only be
carried out by electrical specialists.
DANGER
All tasks with and on the fan!
Fatalities or extremely serious injuries as a result of
transport, mounting, commissioning and start-up, operation,
operating, troubleshooting, inspection, maintenance, repair,
shutting-down, dismantling and disposal.
→ Wear personal protective equipment.
→ Observe safety regulations.
→ Observe the regulations for the prevention of accidents.
ATTENTION!
Harmful to the environment!
Dispose of individual parts of the fan, accessory parts
and lubricants in an environmentally-friendly manner,
and in accordance with the requirements of the
respective country of use.
NOTICE!
Allow dismantling to be carried out professionally by
a REITZ service technician.
17. Dismantling
