REITEL POLIRET, Operation Instructions Manual, Page: 9 / 20

9
Specific Safety Instructions
•
Tools and the lamp may only be changed when the spindle stands still and the whole unit
is unplugged.
•
Fold the protective panel down and wear protective glasses.
•
Only use appropriate and no unbalanced tools. Make sure all tools are fastened securely.
•
Switch suction on.
•
Never touch the running machine.
•
Always respect the instructions of the polishing a
nd grinding tool’s manufacturer (e.g.
max. speed, appropriate material to be treated).
•
Use only appropriate material for polishing. Always resepect the instructions of the
polishing and grinding tool’s manufacturer, especially regarding health protection.
•
Always wear clothing which is tight at the forearms and hands. Avoid loose hair and
jewels which could get into the spindle or tools.
•
Use only clean or disinfected material with the machine.
•
In case of danger press the emergency stop switch (9). Turning to the right, the
emergency stop switch can be unlocked.
•
Hold the object to be polished tight. Danger of injury from flying particles and danger of
damage to workpiece.
Attention:
•
Wait for at least 2 min. before unplugging the mains plug for cutting off the device from
the domestic supply line in order to unload the condensers.
•
The tool must be securely fastened to the spindle.
Danger of injury!
•
Operation at too high speed
– risk of burns!
•
Always keep the housing dry and clean.