INTRODUCTION
This angular accessory rail is made to extend the normal rail on an operating table. Also, when a
accessory have to be attached laterally or slanted out from the op.table, the angular accessory rail fits
in. It is provided with a quick lock “hook on” clamp. It can be adjusted in height and the rail itself
can be rotated all around and locks every 15°.
ABOUT USERS MANUAL
This user manual is for clinical personnel, service personnel and others who need the knowledge
about and understanding of how this accessory works and how it can be used.
•
Read user manual carefully before use of the equipment.
•
Always follow the instructions in user manual.
•
Always keep user manual close to the equipment.
INSTALLATION
Check by the unpacking, that there are no damages on the equipment and that all parts are delivered
according to the delivery bill. Also, check for loose parts in the box.
The packing material consists of cardboard and plastic which all can be recycled.
IMPORTANT SAFETY INSTRUCTIONS
•
When the locking lever for height adjustment is released, responsible personnel must be sure
of that there are no human parts in the risk area and that the accessory is supported in any
other way to prevent it from falling down.
•
To avoid damage on the accessory, or on other equipment, all movements with the operating
table must be done very carefully.
•
The locking lever in the clamp must not be released when an accessory is attached to the
angular accessory rail, if it isn´t supported in any other way.
GENERAL DESCRIPTION
10-359 Edit.1 Page 2(4)
Lock lever for
vertically adjusting.
To release, turn lever
anticlockwise. To lock
turn lever clockwise.
”Hook on”
clamp with
eccentric locking
Clamp lock lever. For locking,
turn lever to horizontal, to the
right or to the left.
Knob for angular adjust of the accessory rail. To
release the rail, turn the knob clockwise 2-3
revolutions, put rail in desired position and lock
by turning the knob anticlockwise.
Accessory rail
