Reiner speed-i-Marker 940, Operating Manual, Page: 64 / 92

PCset graphic Help 940 64
ERNST REINER GmbH & Co. KG
5.6.3.1.1 Numbering machine settings
Function Description
Step width Indicates the interval at which the numberer counts on (e.g. 1,4,7...
in steps of 3).
Repeats Indicates the number of repetitions of an imprint. If, e.g., the value 3
is set, the numberer remains on the same number for three
imprints before it counts on.
The repeat factor can be set from 0 to 99.
The numberer switches on at the value 0.
Downwards The numberer can count up (e.g. 10, 11, 12 ...) or down (e.g. 10, 9,
8, ...).
Leading zeros Leading zeroes can be suppressed or printed (e.g. 5 or 00000005).
The number of printed digits depends on the maximums set under
"Number circle".
5.6.3.1.2 Number circle
The number circle defines the value range in which a numberer counter.
When the maximum or minimum value is reached (when the numberer counts up or down),
the count is continued on the respective other end of the scale.
Function Description
Minimum This value marks the lower limit of the number circle.
Maximum This value marks the upper limit of the number circle.
Actual value The current counter reading can be set within the defined value
range.