Reiner P3-MP, Instructions Manual

Page: 11 / 40

10
GB
3. Storage

Fig.
A
+
B
MP ink is fast-drying. The time it takes the print nozzles 7
to dry up depends on the ambient temperature
and the humidity.
Put the device into the station during short print breaks or
close the nozzle cover.
Observe acoustic signals of the device.
Where the device is not equipped with a nozzle cover, protect
the printing cartridge
2 against drying out with the dust
cover 3 when interrupting work.
To securely close the nozzles 7 of the printing cartridge
2
,
keep the seal at the dust cover
3
free from dirt and dust.
f
Remove the printing cartridge
2
out of the device.
f
Guide the printing cartridge into the dust cover 3 .
f
Push the printing cartridge down until the
latching wings
5
click.
f
Fasten the latching wings with the safety band 4 .
Use the print head within four weeks after opening.
4. Environmental Conditions
Temperature for storage +10°C to +20°C
Temperature for transport -20 °C to +40 °C (up to 24
hours)