Reiner P1-MP, Operating Manual

Page: 5 / 9

10
GB
3. Storage
_
Fig. A + D
MP ink is fast-drying. The time it takes the print head
nozzles
6
to dry up depends on the ambient temperature
and the humidity.
- If the printing break will probably take more than 5 minutes,
the print head 4 should be protected with the clip 3 .
- If the printing break will probably take more than 2 hours,
the print head
4
with the clip 3 should be stored in the
air-tight aluminium pouch.
„
Remove the print head
4
out of the device.
„
Place the print head
4
with the clip
3
on a smooth and solid
surface as shown in figure D .
„
Press the print head
4
down until it snaps in the clip
3
.
„
Place the print head 4 into the aluminium pouch and close
the zip fastening completely.
Use the print head within four weeks after opening.