Reiner N41A, Operating Instructions

Page: 4 / 12

GB GB
To set the stamp wheels _ Fig.
1
+
2
+
3
u
Press the handle to the bottom of its
travel, then while still holding it.
u
Press and hold button on the front plate
u
Allow the handle to move upwards until
the handle locks in place.
u
You will be able to move the stamp wheels
freely with the stylus .
u
In order to return to the print position,
simply push down on handle .
You can easily place the date one day further
ahead!
(Not valid for the stamp Model N41a.)
u
Press the switch button once.
To insert the inkpad
_
Fig.
1
+
4
Handle with caution to avoid dirt from ink!
u
Press the handle to the bottom of its
travel, then, while still holding it.
u
Press the button on the front plate and
continue to hold it.
u
Allow the handle to move upwards until the
handle locks in place.
u
Unpack the inkpad carefully.
u
Squeeze the grips on the back of the
inkpad and hold them.
u
Resting the back of the ink pad inside the
pad cradle slide the pad into the slot of
the stamp.
u
In order to return to the print position,
simply push down on handle .
To change the numbering actions _ Fig.
3
Actions
0
The same number is stamped every time.
1 Number increases after each stamping
process.
2 Number increases after every 2
nd
stamping process.
etc.
u
Press the switch lever and slide it to the
desired action.
To park the stamp _ Fig.
5
To prolong the life of the inkpad,
park the stamp!
u
Press and hold button on the front plate.
u
Gently push handle downwards until the
stamp clicks & locks in a raised position.
u
In order to return to the print position,
simply push down on handle .
A
A
A
A
A
B
B
F
A
B
I
J
E
C
D
A
A