Reiner jetStamp graphic 970, Operating Manua

Page: 77 / 94

Maintenance 77
ERNST REINER GmbH & Co. KG
Release trigger button .
Slightly push the lock of print cartridge to the right, until the print cartridge flap can
be opened.
Open print cartridge flap .
Remove print cartridge from the device.
Take new print cartridge from the packaging and remove protective film from the nozzles .
Put the jetStamp graphic 970 on a fixed flat surface.
Inserting printing cartridge .
Closing the print cartridge flap .
Push the trigger button .
Print carriage moves to the home position.
Return jetStamp graphic 970 to the basis station to prevent drying of the ink. Observe acoustic
signal of the jetStamp graphic 970 (see " Acoustic Signals ").
6.2 Clean Print Cartridge Contacts
Clean Print Cartridge Contacts Fig. + +
In rare case, contamination of the print cartridge contacts may cause defective print results.