Reiner jetStamp graphic 970 Operating Manua Download

Page: 71 / 94

The Software Application PCset graphic

ERNST REINER GmbH & Co. KG

5.6.4.3

Context menu barcode object

If a barcode object is inserted (refer to "

Objects

"), the configuration corresponds to the

presettings. The context menu can be used to individually
set each barcode object deviating from this.

To open the context menu, right-click the desired barcode object.
The context menu opens as in the following figure.

Function

Description

Copy

Copies the object.

Barcode format

To change the barcode format.

Generate graphic

Fixates the barcode in the current position.

Note: the barcode cannot be edited anymore after fixating.

Delete object

Deletes the object.

5.6.4.4

Generate graphic

Text and barcode objects can be converted to graphics. Graphics are fixed and cannot be
moved. Limited editing is possible via the additional function "Selection".

Click object with the right mouse button.
Select "Generate graphic".
The object is converted into a graphic.

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands