Reiner ChronoDater 920, Operating Manual

Page: 35 / 148

GB
1. Prepare and Commission
1.1. Commissioning, Ribbon Cassette
Inserting ribbon cassette

Fig. D
Avoid skin contact with ribbon.
f
Swivel housing flap
2
upwards and remove it.
f
Remove ribbon cassette
8
from the packaging.
f
Push ribbon cassette
8
over the metal cover until it is flush.
f
Tension ribbon. For this, turn the red dial of the ribbon cassette in the direction of the
arrow to the right.
f
Re-attach the housing flap
2
.
1.2. Attaching the Paper Stop
Attaching the paper stop  Fig. A + B
The paper stop services as lateral indicator of print position for the vouchers to the printed.
f
Apply paper stop
3
to the front edge of the trigger table from the left or right and put it
in the desired position.
1.3. Adjusting Trip Switch
Adjusting
6
trip switch  Fig. A + D
f
Release screw.
f
Push trip switch to the desired position. A slight resistance and latching sound
are normal.
f
Tighten the screw until slight resistance is noticeable.
33
ChronoDater 920/922/925