Reinecker Videomatic VEO, User Manual

Page: 9 / 34

9
licensed distribution partner.
Precautions by alteration of the performance of the system
Stop using the reading device if technical features or performances
should change. Switch the device off and disconnect the power supply
from the mains wall socket.
Refer directly to your authorized dealer or to Reinecker Vision GmbH
Service Center.
Reinstatement and installation
This device may be technically maintained and reconditioned by
Reinecker Vision GmbH only or by an authorized technician.
Reinstatement may only take place after the system has been cleaned
and safety checked.
Cleaning of the system
•
Videomatic VEO has to be disconnected from the power supply
before cleaning.
•
The monitor and the system have to be cleaned with a glass
cleaner.
•
Interior of device must NOT come in contact with liquids.
Special advice for transport and storage
For reasons of safety, the unit must only be transported and stored in
the original packing. The unit must be stored in dry and closed rooms in
the original packing.
The following conditions for transport and storage have to be respected:
•
Air pressure 700 to 1000 hPa
•
Temperature range +5°C to + 50°C
•
Relative air humidity 30% to 80%
Disposal of the unit according to EU directive 2002/96/EEC
Videomatic VEO contains of electronic components. In order to avoid
damage to the environment, the country-specific rules have to be
respected.