16
Controls at the rear of the camera
Autofocus ON/OFF
By using the autofocus key, autofocus can be turned ON or OFF. The status of the
autofocus function is displayed for approximately 4 seconds at the bottom of the
screen. When autofocus is switched ON, the camera will automatically adjust the
focus setting.
Overview mode
If you work with a large magnification and no longer know which area of the reading
template you have enlarged, this function gives you an overview of the position of
the enlarged area.
Therefore press the control button for about 2 seconds until the overview mode
starts and the image on the monitor is zoomed out. The crosshair in the center of
the monitor works as pointer to show which area has currently been enlarged.
If you release the control button, the image returns to the originally selected magnifi-
cation.
Please note
: The camera can also be swiveled beforehand to a different area,
which is then enlarged accordingly.
Zoom + / -
The magnification can be increased or decreased by using the keys +/-.
Mirror Mode
The picture display on the monitor can be changed to operate as if you were
looking at a mirror.
This is useful if you want to perform a personal task such as shaving or applying
make up. To enter the mirror mode, press and hold down the zoom + and zoom –
keys, until the display briefly indicates „mirror ON“. Then, flip the camera up as if you
were using the distance mode. Rotate the camera as far as you can back towards
you. It cannot rotate back the full circle, so you will have to re-position the base of
the unit to get the camera pointing towards the user. For best operation, turn the
Autofocus OFF while in mirror mode.
To return to the normal operating state, press and hold down both keys again until
the display indicates a sign „mirror OFF“ and the image will be back to its normal
operating state.
-
ZOOM
+
-
ZOOM
+
AUTOFOCUS
Summary of Contents for Topolino Smart 2K
Page 2: ......
Page 30: ...Notes ...
