Error Codes:
The following error codes are listed in various sources for the D10 display.
Error code 28 is the most likely in normal operation.
Error
code
Error type
Failure Solution
21
Abnormal current
Contact supplier
22
Throttle Error
Contact Supplier
23
Motor phase failure
Contact Supplier
24
Motor hall failure
Contact Supplier
25
Brake abnormal
Contact Supplier
28
Speed Sensor Error
Check that the wheel magnet is correctly aligned. The
magnet flat end should be opposite the raised arrow on the
speed sensor, not the circular bulb.
30
Communication
Check that the display connector is secure
31
POWER button stuck
Check button not fouled or stuck down.
32
Display voltage error
33
Self-check failed
Contact Supplier
34
Walk Assist button
sticky
Check button is not fouled/stuck
Settings