Page 10
12084-101 Rev. D
BULB REPLACEMENT
DO NOT REMOVE LENSES FROM THE OBJEC-
TIVE BARRELS.
NOTE: Use only Reichert speciied Hallogen Bulbs.
1. Turn the Instrument “OFF” and unplug the power
cord from the wall and the instrument.
2. Remove the back cover by inserting a tool into
the rear cover fastener (13) and turning a quarter
turn counterclockwise.
3. Remove bulb relector housing by loosening
screw (21). Then pull housing back and lift away
to uncover bulb (See Figure 6).
WARNING:
DO NOT TOUCH THE BULB HOUS-
ING OR THE BULB UNTIL THEY
HAVE COOLED COMPLETELY. DO
NOT TOUCH THE GLASS OF THE
NEW BULB AS FINGERPRINTS WILL
SHORTEN THE BULB LIFE.
4. To remove the bulb, grasp the glass envelope
with a thick cloth and pull the bulb upwards.
5. To replace, grasp the glass envelope with a thick
cloth and insert the pins straight into the socket
and gently push down until fully seated.
6. Replace the bulb relector housing and the
cover.
7. Plug the power cord into the instrument and then
into the wall. The projector is now ready for use.
FIGURE 6
SLIDE CLEANING
Emulsion slides (ilm between 2 pieces of glass)
require special care during cleaning. Newer slides
are typically a metallic deposition on glass and can
be cleaned more easily.
IMPORTANT:
IF YOU ARE NOT SURE WHAT
KIND OF SLIDE YOU HAVE, WE SUGGEST YOU
CLEAN IT AS IF IT WERE AN EMULSION SLIDE.
EMULSION SLIDES: Dampen tissue (preferably lint-
free) with a glass cleaner. Carefully wipe surface.
Extreme pressure should be avoided as excess liquid
may seep between the glass plates. Examine for and
remove streaks.
DO NOT IMMERSE IN LIQUID AS IT MAY SEEP
BETWEEN THE GLASS PLATES.
DEPOSITION SLIDES: Use a glass cleaner with
a tissue (preferably lint-free).
SCREEN CLEANING
The REICHERT PROJECT-O-CHART screen has an
extremely high relective characteristic and is very
susceptible to abrasive scratches and ingerprints.
HANDLE WITH CARE.
THE SURFACE CANNOT BE REFINISHED EASILY
Periodic cleaning of the screen is advised: Use a mild
detergent solution, wiping screen surface gently with
dampened absorbent cotton.
ACCESSORY/PART NUMBERS
12090 Table Mount
12091 Wall Mount
12092 Instrument Stand Mount
12096 Floor Stand
12094 Yoke
11808 P-O-C Screen
!
Summary of Contents for LongLife Project-O-Chart 12084
Page 1: ...LongLife P O C User s Guide ...
Page 16: ......
