12
16012-101 Rev. C
Instructions for Use (Continued)
Start Measuring Central Corneal Thickness (CCT) Measurement
Preparation of the Patient
The patient should be in a seated position. It may be helpful to explain that they should relax and attempt not to blink as
the probe is going to gently contact their eye. A drop of ocular anesthetic should be placed in the eye or eyes that are
going to be measured. If the patient has dry eyes, a moisturizing drop may also be used.
Entering a New Examination
On the start up screen, Tap: Start Measuring.
Note:
The buttons are laid out where possible to facilitate tapping with your fingers. For data entry the stylus is the
recommended method.
Examination Registry – Screen
Tap on Operators located on the upper right side of the screen. From the pull down menu select an existing operator or
add a new operator name.
Add a new operator by selecting (add new name). A box will appear where you can input the operator’s name. Once
patient information is complete press: OK
Tap on the Recall button to retrieve the last patient information.
Summary of Contents for IOPac Advanced
Page 1: ...ADVANCED User s Guide ...
Page 37: ...16012 101 Rev C 37 Notes ...
