Wireless Dongle Kit configuration options:
Some Wireless Dongle Kits will connect directly to an instrument using
only an
Adapter Set
configuration, while other Wireless Dongle Kits will
connect to an instrument using only an
Extension Cable
configuration.
In some instances a Wireless Dongle Kit can connect to an instrument
using either configuration. For those installations it is up to the user to
decide whether you prefer to connect directly using the Adapter Set or if
you prefer to use the Extension Cable to hide the Wireless Dongle from
view behind a counter or under an instrument table.
Follow the instructions for your specific instrument.
NOTE:
Your Wireless Dongle Kit may be designed to connect in multiple configurations,
so you may not use all the parts included in this kit for your specific installation.
Connecting ClearChart
®
2:
The
ClearChart 2
Digital Acuity System uses the Extension Cable
configuration to connect to the Wireless Dongle Kit. The serial port (
A
) on
the bottom of the ClearChart 2 is where the Wireless Dongle will connect
.
NOTE:
Current models of ClearChart 2 have the serial port located at the bottom left corner
of the unit, while older models have the serial port located toward the bottom center of the
unit. Please take a moment to identify the serial port location.
NOTE:
If the serial port is located at the bottom left corner, you will need to connect the
Right Angle Serial Adapter
7
for easier cable management before continuing.
ClearChart 2 w/ serial port
at bottom left corner
A
ClearChart 2
w/ serial port at bottom center
A
ClearChart 2 w/ serial port at bottom left corner
plus Right Angle Serial Adapter
7
7
