6
Turn microphone switch to ON position.
Change switch to MUTE, receiver will cut audio output
and restrain noise.
7.
Transmitter Microphone LCD
Display of current Channel and frequency
Battery power indicator: Full (3 bars), 60% (2 bars), 40%
(1 bar), and 10% (no bars).
8.
Troubleshooting
Issue
What to do
No LED lights when unit is
powered
Check if the cable is plugged in
correctly and that proper voltage
is present
No Audio output
Check that microphone is
paired to receiver and that
signal “BARS” are active.
Check system volume
settings.
Verify that microphone
batteries are fully charged.
Poor signal strength
Check that antennas are
connected.
Possible frequency
interference; pair to a
different frequency.
Weak output
Verify that microphone
batteries are fully charged.
Check system volume
settings.
Verify that another device is
not on the same frequency
and interfering; adjust
frequency as needed.
