REHM TIGER DIGITAL 180 AC/DC ULTRA, Operating Instructions Manual

Page: 48 / 83

Function description
48
Current display
0 Voltage indicator off
1
Display of the average voltage after welding has
stopped.
2 Display of the average voltage
- during welding
- at the end of welding
The average value is updated every 2 seconds.
Voltage detection range:
Water cooling unit
mode ON
OFF
Auto Pump and fan are off
Pump and fan are running
Pump and fan are
automatically switched on
when welding or when the
coolant temperature is
greater than 30°C.
Polarity electrode
welding
Automatically sets to DC negative
Possibility to adjust
the potentiometer
from the torch
Potentiometer in the torch is active
Function torch
button2 (BT2)
BT2 mode of operation:
On/Off button operation or 4 cycle
Start current display
End current display
Mode in the
Program List menu
(folder)
Default position
main screen If no settings are made, the cursor on the main screen
automatically goes to current position I
1
.
Factory setting is 20 seconds