4. Safety and Maintenance
Before use, be sure to comply to with the following safety and maintenance instructions:
Protect the device and its batteries from moisture, rain, sand or extreme temperatures
like radiators or direct sunlight.
Do not use cleaning products that contain alcohol, methylated spirits, ammonia or
abrasives. These can damage the device or its touch screen.
Only use accessories that the manufacturer supplies you with, or approves of.
Never throw batteries into a fire. Batteries and chargers that are defect are considered
chemical waste. They therefore need to be disposed of at a refuse/recycling centre of
your choice.
Note that the use of a screen protector might influence the functioning of the touch
screen.
5. Installing the Looky
HD
Connect the battery handle of the Looky
HD
by sliding it onto the connector until you hear it
clicking into place. This battery handle also functions as the Looky
HD
’s handle.
To replace the battery handle push the 2 purple battery release buttons on the side of the
battery handle, and slide on the replacement battery handle.
Charge the battery handle completely before using the Looky
HD
.
Please read the charging instructions carefully.
6. Instructions for charging
Put the adaptor in the wall socket and connect its plug to the
charging adaptor port of the Looky
HD
.
LED burning constantly
batteries are being charged
LED off
batteries are fully charged
LED blinking
error / batteries are defect
Charge the batteries in a well ventilated environment. Remove the Looky
HD
from its carrying
case when charging. Don’t place it in direct sunlight or near a radiator whilst charging.
When the battery is empty, the Looky
HD
will switch itself off. You will hear a high pitched tone
that fades away.
7. Battery handle maintenance
