i-See Special
14
EN
1 Introduction
Congratulations with your i-See; a desktop video magnifier of high
quality that is especially user friendly.
Read this manual thoroughly before you start to use your i-See.
This manual contains instructions on how the device needs to be
installed, and describes all of the functions of the i-See.
2 Installation, safety and maintenance
Package contents
The package of the i-See contains the following:
•
i-See base
•
TFT screen for the i-See
•
i-See control interface (comes in a separate box)
•
Extra cable for control interface
•
Powercable
•
Manual
Installation
Never open up the device yourself;
this will void your
warranty
.
If you suspect the device is in need of service
or repairs, please contact your supplier.
The i-See will be delivered to you in a pre-assembled state. All you
have to do is connect the TFT monitor to the base, click the control
interface to the monitor, attach the cables to the TFT monitor and
connect the power cable to the base.
Attach TFT screen
You can attach the TFT monitor by hanging it on the base and
tightening the bolts on both rear sides of the screen.
