background image

Brief introduction of the Professional Electrostatic Backpack Sprayer 

1) Characteristics of the Professional Electrostatic Backpack Sprayer 

A) Effective application - 

Atomizing solutions to a diameter of 40 to 100μm 

and statically charging them, this electrostatic sprayer greatly improves 
coverage and reduces overspray. The solution will cling to a surface and 
wrap around it, absorbing and spreading out onto the surfaces, finding its 
way into nooks and crannies for optimal coverage. This electrostatic 
sprayer saves money by requiring only 30 to 50 percent of a solution to 
cover the same size area as conventional sprayers. 

B) High kill-rate - 

Because the electrostatically-charged molecules of the 

solution provide such exceptional coverage and are easily absorbed, the 
disinfectant, pesticide, insecticide, and fungicide solutions used with this 
sprayer typically provide a higher kill-rate than with ordinary sprayers, 
doubling the efficacy against toxins, contagions, and pests. 

C) Saves time - 

This electrostatic sprayer saves time as it eliminates the 

need to repeat spray applications. As long as you move quickly and spray 
gently, this sprayer maximizes efficient coverage with just one application. 
Available with three different nozzles that deliver a fine mist, the single 
nozzle sprays a tankful of a solution in about 55 minutes, while the double 
nozzle takes 30 minutes, and the quadruple nozzle takes only 15 minutes.  
 

    

2)    Cautions for the Professional Electrostatic Backpack Sprayer 

A) You must turn on the power switch at the handle before starting the static switch. 

The static switch is located at the base of the equipment and this function 
controls the static electricity. When the static switch is turned on, the copper bar 
must touch the handle of the sprayer by holding it with your finger(s). 

B) Do NOT touch the nozzle once the static electricity is turned on, and the fingers 

should always hold the copper bar against the handle, or electric shock can 
occur. When you’re done spraying, shut down the equipment and place the 
nozzle against an object or the ground to eliminate residual static electricity. 

C) The spray head should be more than 30 cm (about a foot) from the surfaces 

being sprayed. This electrostatic sprayer should never be used during lightning 
storms, nor in foggy, rainy, or high-humidity environments. 

D) Because it is a dedicated pump, this sprayer has high-pressure contents. 

 

 
 
 
 

5-12-2020 

Reviews: