Page 1 (1)
User manual /
Assembly instructions
Art. no.: 63440
MANUFACTURER: HD Rehab AB
Tryffelslingan 4, SE-181 57 Lidingö, Sweden
tel. +46 8 767 04 80
fax. +46 8 767 50 00
www.hdrehab.se [email protected]
Rev. B
Latest revision: 2015-06-18
Art.no. 95820-1
Parts included
Assembly
1. Remove the current side supports by loosening the three screws and pulling the side support off the armrest.
2. Mount the wedge side supports as seen in the picture. Tighten the screws.
3. The picture shows the wedge side supports mounted on the chair.
Care instructions
The wedge side supports can be cleaned by wiping with soap and water. For further information see
Maintenance Instructions, art. no. 95730-1.
Wedge side supports
HD Balance
Wedge side supports Wide
Wedge side supports Narrow
1
2
3
