Your new Rollator comes with the following parts:
Main frame (bag, seat attached)
1x Backrest
2x Handles
2x Handle bolts, washers & knobs
1. Place handles into the frame (1) select the desired height and
tighten with bolt. Ensure the bolt is postioned on the inside of
the frame and seated in the hexagonal cut-out on the frame,
washer and knob tighten on the outer side of the frame.
2. Depress the push-pins on the backrest (2) and slide into place
on the brackets at the top of the frame.
3. To adjust the sensitivity of the brakes, pull the brake
adjustment (5) screw up to release the locking nut, then turn
the locking nut to desired brake sensitivity. Clockwise to
increase sensitivity, anticlockwise to reduce sensitivity.
Assembly / Adjustment
1
2
3