│
4
REGULUS - PG 500 Compact - www.regulus.eu
100 mm
100 mm
100 mm
UPS
2 INSTALLATION, OPERATION
2.1 Description
Front panel
Rear panel
2.2 Position of the unit
Place the unit on a hard, dry surface in a well ventilated room, at
a safe distance from direct heat sources. In order to secure sufficient
cooling, leave at least 100 mm of free space around it.
The unit is designed for indoor use only.
Do not leave the unit in direct sunlight.
Do not leave the unit in excessively hot environment.
Do not expose the unit to excessive moisture.
Do not leave the unit in a dusty place.
ON/OFF push button
Red - backup,
battery operation
Orange - overload,
the unit is overloaded
Green - normal, grid
power is present
Backed up sockets
= OUTPUT
Non backed up socket
Integrated power supply
cable
Fuse
2.3 Recommended wiring
• it is recommended to use solely an installation contactor with a 230 VAC coil, 2x NO + 2x NC
• it must be ensured that the PE lead cannot be disconnected!
• unconditional separation of the circuit fed from PG 500 from the mains shall be respected
