switch must be at M.
Automatic charging control:
The built-in automatic Charging control reduces the current drain on the battery. But after a shooting session remember to
switch oft the flash unit. Otherwise even the reduced current consumption will unnecessarily drain your batteries.
Rechargeable accumulators
You can equip your flash unit at any time with rechargeable nickel cadmium accumulators (nicads). An NC Set 4 is
available for this purpose from your photo dealer and consists of 4 nicads and a charger. During charging, switch off the
flash unit. With the charger flashes can be taken directly from the mains.
IMPORTANT: Only NC accumulators (NiCads) are rechargeable —
never try to recharge other AA cells.
Maintenance:
If the unit is out of use for a length of time, remove the batteries. Keep .the battery terminals and contacts in the battery
compartment lid clean.
Maintenance of the flash capacitor:
If the unit is not in use for longer periods, switch it on some time before you want it and let it run for a few minutes. Better
still — if the unit is used only intermittently — switch it on for about five minutes every two to three months. That keeps
the flash capacitor at its full efficiency.
Technical data:
Guide numbers: ASA
25
50
100
200
400
Guide numbers: DIN
15
18
21
24
27
Variant 740 CTX: metres
20 28
40
56
78
Variant 740 CTX: feet
65
91
130
184
256
Variant 736 CX: metres
18
26
36
50
70
Variant 736 CX: feet
60
85
118
164
230
Flash duration: 1/1000 to 1/50,000 second
Recycling time:
Approx. 10 seconds (model 736)
Approx. 0.5 to 10 seconds (model 740)
Color temperature: 5600° K
Provided free to www.orphancameras.com
