14
Controller WRX
05/2019
EN – Function/Operation
2.3.2 Change setpoint temperature
Fig. 5: Change setpoint temperature
Room temperature can be set
manually with +/- key from
7 °C – 27 °C. Confi rm by pressing
. Al-
ternatively you can tap directly on the tem-
perature on the homescreen. The controller
changes to manual operation: the manual
setting remains active until the next program
block. This is shown on the homescreen with
.
2.3.3 Boost
Fig. 6: Boost
1
2
3
Boost: heating at full output over a fi xed pe-
riod of time
1
Target temperature
2
Remaining run time Boost
3
Cancel
2.3.4 Display time program
Fig. 7: Display time program
Display the current program.
