Exigo tool manual
Chapter 5
Menu bar
9
Chapter 5
Menu bar
The menu bar has five drop-down menus;
File
,
Edit
,
View
,
Tools
and
Help
.
5.1 File
These items are used to handle configuration files. The data describing a configuration can be saved
as a file. Any number of different configurations can be saved, the only limit being available disk
space. The files will be saved using the extension
.htc
and need about 104 kb of disk space. The files
contain only plain text and can be opened using regular editing programs like Notepad or WordPad.
New
New
will open a new unnamed file. A box will appear, in which the relevant model of Exigo is
selected. If you are unsure of which model you are using, the article number can be located on the
right-hand (short) side of the controller. Make sure that you choose the correct model. If you load an
incorrect model, unexplainable alarms, etc., may appear, as certain functions not visible in the present
model may be activated.
Open
Opens a saved file.
Save
Saves the current file to disk. If the file is unnamed, you will be prompted for a name.
Save as
Saves the current file to disk using a new name of your choice.
Read only
This item can normally be ignored. Should you for some reason open two instances of the same file
one of them will be marked as Read only to prevent data conflict.
Prints a list showing all the configuration settings of the present file.