www.
reggiani.net
0
9
HAKO
|
ENG
|
GENERAL FEATURES
The HAKO product line is composed of
track mounted adjustable projectors.
For more technical information about the
product (photometric, electrical data, size,
weight, certification, accessories, etc.) refer
to the catalogue or see the product data-
sheet on the website:
www.reggiani.net/reference.
ASSEMBLY INSTRUCTIONS
WARNINGS
Before assembling the projector, carefully
read these instructions to make sure the
luminaire functions correctly and safely.
Keep the instructions in a safe place for fu-
ture consultation; contact your supplier for
any problems that may arise.
The projector must not be modified. Mod-
ifying the luminaire in any way invalidates
the guarantee of conformity with standards
and directives in force and it could make the
actual projector hazardous.
Reggiani SPA Illuminazione shall not be
held liable for any damage caused by one of
its projectors if not assembled in conformity
to the following instructions.
The projector must be installed in accord-
ance with the best working standards.
Before connecting the projector, make sure
the mains power supply corresponds to the
power indicated on the projector label.
The electrical installation the projector is
connected to must be wired in conformity to
the laws in force.
As a safety guarantee, any components
damaged while operating must be replaced
with the same components before the pro-
jector is used again.
The minimum distance between the projec-
tor and the lighted object must be 0.5 m for
LEDs and 0.8 m for METAL HALIDE LAMPS.
Never cover the projector during use.
Never use abrasives or solvents to clean
the glass.
PREPARATION AND
ASSEMBLY OF THE
PROJECTOR
To assemble the projector,
turn the electricity off at the
mains and follow the instruc-
tions below.
The HAKO family consists of projectors
ready for mounting on the Reggiani elec-
trified 3-circuit tracks, exclusively for ceil-
ing mounting.
To engage the adapter with the Reggiani
3-circuit track:
• observe the correct direction when in-
serting adapter fig.1
A
;
• turn locking lever fig.1
B
;
1
A
ON
OFF
1
B
1
2
3
1
C
