How to select your desired feature
Mode of Operation
Slide switch position
How to set power switch
Auto Setting
(motion activated)
Light fixture with motion sensor
detects motion and sends an ON signal
to receiver. Lights should turn off after
4 or 12 minutes after all motion stops.
The transmitter contains a daylight
sensor, which only allows lights to
come on at night.
4 MIN
Or
12 MIN
Keep the power on to both
fixtures
Dusk to Dawn Setting
(activated only at night)
Lights should stay on from dusk to
dawn and then reset to the auto setting
next dawn.
4 MIN
Or
12 MIN
Turn power on and off twice
within 3 seconds.
Standard Floodlight Setting
Lights should stay on continuously
both day and night (must be reset
manually).
TEST
Turn power on and off twice
within 3 seconds.
TEST Setting
Lights should turn on when the remote
sensor detects motion, both day and
night. Lights should turn off after 8
seconds after all motion has stopped.
TEST
Keep the power on to both
fixtures
