www.regentlight.co.za
www.regentlight.co.za
3
4
5
7
8
6
7
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
5. To install or change the
lamp, unscrew the four
stainless steel screws on the
top of the lid and remove
the lid from the main body,
taking care of any loose
parts which may fall.
Ensure the new lamp is the
correct wattage, according
to the specification and is
securely located in the lamp
holder .
7. Switch on the power
supply.
6. Replace the lid and
secure the lid to the body.
Ensure the gasket is securely
in place before fastening
the lid to the body.
4. Ensure that there are no
exposed conductors, loose
strands or trapped/pinched
insulation between the pole
and the spigot.
3. Place the spigot of the
post top on the pole, align
and tighten the three M8
stainless steel grub screws
(supplied), using an allen
key.
Mark and drill a 8.5mm Hole
M8 Grub screw
REGENT
LIGHTING
CFL/HPS/MH/W
E27/G24
230V 50Hz
C104 Challenger Mini
CLASS 1 IP 65
LOT 00000
Clear diffuser with louvre
Opal diffuser
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
