Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
SRDRT2BF-LRDDS7135-VRDDS7135- INSTRUCTIONS
You will need 2 person(s) for this assembly.
You will need a Phillips Head Screwdriver and a Rubber Mallet to Assemble.
Hardware :
A:
Corner Brackets(6) •
B:
Small Screws(36) •
C:
Cam Pins(16) •
D:
Cam Covers(16)
Reception Desk
Parts :
E1:
Right
Leg
E2:
Left
Leg •
F:
Desk Top •
G:
Transaction Top •
H:
Modesty
A
B
C
D
E1
F
G
H
STEP 1 :
Screw cam pins(C) into legs(E1&E2).
(5 each.)
C
C
C
C
C
E
STEP 2 :
Lay modesty(H) down so the cam locks
face up and connect right leg(E1) to the modesty by
inserting cam pins(C) into locks. DO NOT TIGHTEN
CAM LOCKS YET.
H
E
Fig. 1a
E
C
C
C
C
C
Right leg(E1)
Left leg(E2)
E2
