Regency R90, Specification Sheet

Page: 1 / 3

R90 Wood Fireplace
Model R90
Emissions 3.72 g/hr
Effi ciency (EPA) 63%
BTU/h (EPA) 11,720 (Low) to 42,400 (High)
Flue Size 8” (203mm) Diameter
Log Size 20” (508mm)
Shipping Weight 612 lbs. (278 kg)
Stripped Weight 570 lbs (259 kg)
C
A E
B
D
F
Unit Dimensions Description R90
A Unit Width w/ standoffs 43-5/8” (1108mm)
B Unit Height w/ standoffs 50-1/2” (1283mm)
C Unit Width 38” (965mm)
D Unit Height 42-5/8” (1067mm)
E Unit Depth w/ standoffs 28” (711mm)
F Unit Depth 25” (635mm)
Framing
Dimensions
Description
R90
USA Only Canada Only
G Framing Width 44” (1118mm) 44” (1118mm)
H Framing Height 50-3/4” (1289mm) 50-3/4” (1289mm)
I Framing Depth 28” (710mm) 28” (710mm)
J Corner Wall Length 68” (1729mm) 81-1/2” (2072mm)
K Corner Facing Wall Width 96-1/4” (2445mm) 115-3/8” (2930mm)
L Inside Corner to Center Vent 24-1/2” (624mm) 31-1/4” (795mm)
M Unit Corner Clearance 3” (76mm) 9-3/4” (248mm)
N Inside Chase Framing Width 44” (1118mm) 60” (1524mm)
O
Hearth
**
Depth
18” (457mm) 18” (457mm)
P
Hearth
**
Width
40” (1016mm) 40” (1016mm)
Q Thermal Protection Thickness 1/2” (12.7mm) 1/2” (12.7mm)
R Combustible Ceiling Height 84” (2134mm) 84” (2134mm)
** Required Non-combustible Hearth with thermal protection - Minimum
“K” Factor of 20.07 (CAN) or 0.84 (US)
171 June 2007 Regency Product Specifi cations Book
Wood Fireplaces
W
ood Fir
eplaces
Finishing Material
Safety Strip
Z Type
Safety Strip
Finishing
Material
2-1/2”
(64mm)
2-1/2” (64mm)
G
H
I
K
J
L
M
O
P
N
P
O
N
USA ONLY
CANADA ONLY
R
Q
Q
Thermal Protection
Thermal
Protection
NOTE: Hearth requires thermal protection in front of the fi replace and
must have at least 1/2" (13mm) Millboard under the fi nishing
material with minimum "k" factor of 20.07 (in Canada), 0.84 (in
US). If the bottom of the unit is raised 4" (102mm) above the
hearth, the thermal fl oor protection is not required.
NOTE: Safety strip is required when the fi replace rests on a combustible
surface, and should extend 2” in front and on the sides of the
fi replace. When using a wooden support to raise the fi replace.
A “Z” type safety strip, not supplied, must be fabricated (Use 20
gauge galvanized sheet steel).
R90 Wood Fireplace