STEP 2:
Attach
Stringer(D)
to
Center Leg(B)
by lining up Eclip with it’s corresponding hole, and sliding down into place.
Please Note:
Center Legs (B)
have EClip attachment holes on both sides.
D
B
A
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Figure 1
Legacy Modular Conference Table • INSTRUCTIONS
(LCTRT14452, LCTRT16852, LCTRT19252, LCTRT21652, LCTRT21652,
LCTRT24052, LCTRT26452, LCTRT28852)
Organize your parts. You may need a rubber mallet.
D
A
STEP 1:
Attach
Stringer(A)
to one of the
End Legs(A)
by lining up the Eclip with its corresponding holes, and sliding down
into place
(see figure 1.)
Please Note:
End Legs (A)
have EClip attachment holes on one side only.
