14
Regency IG35 Gas Inbuilt Fireplace
Notch
E)02-45
Bracket
A)02-65
The bottom right edge of Log G)02-48 must
sit snugly against the bracket
Side View
G)02-48
E)02-45
F)02-47
11)
Position notch in Front Right Log G)02-48
on Log F)02-47 and push the bottom right
edge against the bracket on the burner tray.
G)02-48
12)
Test fire to ensure proper light off. Ensure
flame flows smoothly from one end of the
burner to the other. If there is any flame
hesitation, check the area for any blockage
of the burner port.
Cutout
Notch
F)02-47
E)02-45
A)02-65
10)
Place the notch in Center Log F)02-47 over
Log E)02-45 and across the cutout on Log
A)02-65.
Installation of Kit 486-930:
1)
Carefully remove the logs from the box and
unwrap them. The logs are fragile, handle
with care -
do not force into position.
2)
Sprinkle the embers on the front, left and
right sides of the firebox base.
3)
Place Side Log 02-50 on the right side of
the grate on the firebox base.
Position log as desired ensuring the log
DOES NOT
interfere with the flame. Possible
positioning shown in diagrams below.
4)
Place Side Log 02-52 on the left side of the
grate on the firebox base.
Position log as desired ensuring the log
DOES NOT
interfere with flame. Possible
positioning shown in diagrams below.
02-50
02-50
02-50
02-52
02-52
02-52
Example 1
Example 2
Example 3
Example 1
Example 2
Example 3
5)
Test fire to ensure proper light off. Ensure
flame flows smoothly from one end of the
burner to the other. If there is any flame
hesitation, check the area for any blockage
of the burner port.
INSTALLATION
