Clean Front Installation
Framing Tab
The finishing material can be brought to the edge of the fireplace opening.
Do NOT finish beyond the opening, doing so will prevent the screen from
being attached and removed.
The Optional Clean Front Trim is available to prevent this from happening.
See Section:
C
lean
F
ront
t
rim
i
nstall
i
nstruCtions
for details.
Nailing Flange Instructions:
Optional Clean
Front Trim
Optional Clean Front Trim Install Instructions:
1.
Loosen the four (4) screws that secure
the left and right nailing flanges to
the unit.
2.
Slide the left and right tiling flanges
onto the front of the fireplace. Use the
slots to center with the screw securing
the Nailing Flanges.
3.
Tighten screws down.
4.
Slide the Bottom Tiling Flange against
the bottom of the fireplace. Secure with
a screw on each side.
5.
Finishing material can now be pressed
against the flat edge created by the
Clean Front Trim.
1. Bend Nailing Flange Tabs 90° backward to create the framing standoff.
max.
Grandview® G800EC Gas Fireplace | P. 12
