Regency
®
F33-3 Freestanding Gas Stove
19
View from back of stove
Strain relief
grommet
W
AR
NI
NG
24
0 V
ol
ts
Tu
rn
of
f p
ow
er
be
fo
re
op
en
in
g.
Placement of Decal
“Warning 240 Volts
Turn Off Power”
Wiring Diagram
Diagram 3
FAN REPLACEMENT
For Leg Unit:
Remove 7 screws, remove bottom access panel and
replace fan assembly.
1)
Disconnect power to fan.
2)
Open pedestal door and remove door cover plate by removing 4
screws. See diagram 1.
Diagram 1
3)
Remove valve cover plate by removing 2 screws.
4)
Disconnect the molex plug (from inside the stove).
Note: The #8 ground lug is a dedicated ground for mobile
home use only.
5)
Loosen the four 8-32 x 1/2 screws provided into the nutserts
as shown in diagram 3.
NOTE
: Make sure the fan is supported
as it may fall when the 4 screws are loosened.
Diagram 2: Ground Lug
6)
Disconnect the 2 ground wires (green and yellow/green striped)
to the ground lug as per diagram 2.
Note: The #8 ground lug is a dedicated ground for mobile
home use only.
MAINTENANCE
