![Regency F1104S Owners & Installation Manual Download Page 21](http://html.mh-extra.com/html/regency/f1104s/f1104s_owners-and-installation-manual_1433821021.webp)
F1104S / F3104L Freestanding Woodstove
| 21
21
|
installation
Blower/Fan (846-515)
1)
Remove the two screws from the top of the
fan housing.
2)
Slide the fan up into the rear heat shield.
3)
After aligning holes, secure the fan to the rear
heat shield using the two screws removed
earlier.
Note: The connection cord should not be
in contact with any hot surfaces.
Read the operating instructions for the fan
before using.
Ground
Fan
Fan
Ground
Green
Neutral
Live
Whit
e
Fan
Switch
Manual/
Auto
Switch
Black
Black
High
(Black)
Low
(Red)
Black
Fan Thermodisc
(normally open)
120V AC
60 Hz
Blower/Fan Wiring Diagram
Wire98gr.eps
updated Jan. 27/00
updated: Aug. 09/05
capitalized the word Nut
Lockwasher
Ground wire
from power cord
Ground wire
from fan
#8 Groun Lug
d
Star washer
Nut
Nut
Star washer
Grounding
Lug Detail
CAUTION
: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged
(grounding) plug for your protection against shock
hazard and should be plugged directly into a properly
grounded three-prong receptacle. Do not cut or remove
the grounding prong from this plug.
NOTE:
This appliance, when installed, must
be electrically grounded in accordance
with local codes or, in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electrical
code, CSA C22.1.