City Series Power Vent
919-920
10.11.18
1
CV40EPV / CB40EPV / CC40EPV
Gas Power Vent Installation CV40EPV / CB40EPV / CC40EPV - Rigid Vent
BX Cable
(sold separately)
Rigid Pipe Adaptor
(Required,sold sepa-
rately)
Frame Assembly
(included w/Power Vent kit)
Power Vent Terminal
(946-535)
Slip Section
(sold separately)
The Power Vent System is a Direct Vent Terminal designed to allow installation of gas appliances where typical vent confi gurations cannot be achieved.
These installation instructions must be used in conjunction with the appliance and appropriate Power Vent components installation instructions.
120 Volt power supply is required to operate this system.
946-535 Power Vent Kit with Vent Terminal
1
510-994
Rigid Pipe adaptor
sold separately
1
Power Vent Fan
included w/Power Vent kit
1
Power Vent Frame
included w/Power Vent kit
1
911-250/P
45' 5-wire BX cable or
sold separately
1
911-251/P
90' 5-wire BX cable
sold separately
amount required
for install
4" x 6-5/8" Rigid Pipe
sold separately
1
946-535
Power Vent Kit
sold separately
Models Equipped with Surefi re Ignition
The Power Vent system can only be used with units that have been tested with the Regency Power Vent system.
Downward vertical vent runs are permitted with the Surefi re Ignition system. See vent confi guration in unit manual.
4" x 6-5/8" Rigid pipe lengths
(sold separately)
Power Vent trim
(incl. with Power Vent
kit)
Power Vent frame
(adjustable depth)
(incl. with Power Vent
kit)
Power vent trim
Power vent frame
CB40EPV Shown
GAS POWER VENT INSTALLATION CB40EPV - RIGID VENT
CB40EPV Gas Fireplace
