9476
• Assembly Instructions for the
9476 Side Chair
ASSEMBLY ONLY REQUIRES AT LEAST 1 PERSON & INCLUDED HARDWARE
Any problems or questions? Call Regency at 1-866-816-9822 or email [email protected]
STEP 1:
Insert the
Small Slat (I)
into angled part of
either
Leg (F)
, with holes facing inwards.
Ensure it is inserted all the way into the leg
STEP 3:
Attatch other
Leg (F)
by aligning the holes
on the legs with the pegs from the
Slats (I)
. Ensure
the leg is pressed down onto the pegs completely.
STEP 4:
Attach
Seat Back (H)
by lining up the
cutouts on the underside of the
Seat Back (H)
with
the holes on the top of each
Leg (F)
. Secure with
both
Small Bolts (A)
STEP 5:
Place
Bracket (D)
into
one of the cutouts in
Slat (I)
with open edge facing inwards
STEP 6:
Place
Large Bolt (B)
through
Bracket (D)
and tighten using
the
Assembly Key (E)
. Repeat STEP 5 & 6 for each one of the 4 total
cutouts on the
Slats (I)
to secure the assembly.
PUSH
DOWN
STEP 2:
Insert the
Large Slat (I)
into straight beam
of the same
Leg (F)
as
STEP 1
with holes facing
inwards and once again making sure it is all the
way inserted.
PUSH
DOWN
I
I
I
I
I
I
F
F
F
D
B
E
D
H
F
A
D
