9476
• Assembly Instructions for the
9476 Side Chair
ASSEMBLY ONLY REQUIRES AT LEAST 1 PERSON & INCLUDED HARDWARE
IMPORTANT NOTICE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching them.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples & packing straps before you start to assemble.
•
DO NOT
tighten all screws/bolts until completely assembled.
• Keep all hardware parts out of reach of children.
Any problems or questions? Call Regency at 1-866-816-9822 or email [email protected]
PARTS:
HARDWARE:
F: 2x
Legs
A: 2x
Small Bolts
E: 1x
Assembly Key
G: 1x
Seat
B: 4x
Large Bolts
H: 1x
Seat Back
C: 4x
Large Screws
*I: 2x
Slats
D: 4x
Bracket
*Please note that one slat is shorter than the other. Ensure that the shorter slat gets inserted into the more angled side of
the leg with holes facing inwards.
