background image

 

Regency I2404    

|

   

 3

3

table of contents

SAFETY LABEL

Safety Label  ..................................................................4

UNIT DIMENSIONS

Unit Dimensions  ...........................................................5

INSTALLATION

Before Installing Your Insert ...........................................6
Chimney Specifications .................................................6
Wood Insert Specifications ............................................6
Installing Your Insert ......................................................7
Optional Flue Connector Kit ..........................................7
Masonry And Factory Built Fireplace Clearances  ........8
How To Determine If Alternate
Floor Protection Materials Are Acceptable ....................8
Flue Connector Bracket .................................................9
Installation Into a Masonry Fireplace .............................9
Installation Into a Factory Built Fireplace .......................9
Stainless Smoke Deflector Installation ........................10
Installation of the Faceplate and Trim ..........................11
Installation of the Fan/blower .......................................12
Floor Protection ...........................................................13
Firebrick Assembly ......................................................13
Draft Control ................................................................13
Flue Baffle & Secondary Air Tube Installation .............13
Door Handle ................................................................13
Screen Door ................................................................13
First Fire ......................................................................14

OPERATING INSTRUCTIONS

Some Safety Guidelines ..............................................14
Wood Storage ..............................................................15
Ash Disposal ................................................................15
Fan Operation  .............................................................15
Creosote ......................................................................15

MAINTENANCE

Maintenance of Gold-Plated Doors .............................16
Door Gasket ................................................................16
Door Latch Adjustment ................................................16
Glass Cleaning ............................................................16
Glass Replacement .....................................................16
Glass Removal ............................................................16

PARTS LIST

Main Assembly & Options ...........................................17
Faceplates  ..................................................................18
Brick Panels  ................................................................19

WARRANTY

Warranty  .....................................................................20

ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY.

ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENTS.

Summary of Contents for I2404M





























Reviews: