Regency 5000 Yealink R32G, User Manual

Page: 3 / 8

Regency 5000 ‐ Yealink T32G IP User Guide.Docx V1.00.0001
3
Tips for Using your Yealink T32G IP Phone
Making a Call
Users can make a call by pressing the Hands – free/ Line key or picking up the handset

Dial number directly: Dial the number directly, and press Send soft key/button

Dial from Pool: In dial – up interface, press Pool hot key, enter the highlighted options,
select a record, then press Send to dial out.

Re ‐ dial: Press RD button to enter the Dialled Calls interface then select a record to dial
out.
Answering a Call
Answering an incoming call in the following ways:

If there are no active calls, lift the handsets or press the Hands ‐ free button/ Answer hot
key/ Headset to answer the incoming call

If there are active calls, press the answer hot key to answer the incoming call or press
the Reject hot key to refuse
Muting a Call

Press Mute button to mute the call during the conversation, the LCD will display

Press Mute button again to turn on the microphone
Volume Adjustment

During the call, you can press the volume adjustment bars to adjust the volume
Putting a Call on Hold

Press the hold button or hold hot key to put an active call on hold and then the
corresponding Line Key LED will blind.

If there is only one call on hold, press the Resume hot key or Hold button to retrieve the
call

If there is more than one call on hold, press the corresponding Line Key or UP/Down
navigation keys to highlight the call, then press the Resume hot key or hold button to
retrieve the call
Voice Mail

The Presence of new Voice Mail messages is indicated in the idle screen. The Message
LED will be on.

Press Voicemail hot key or the Message button, and then enter the desired password to
retrieve the voicemails.