REGEN C-NOVE
8
Usage of Cotton Pad
Remove the fixing ring from the electrode head.
Put the cotton pad on the electrode head and attach it to the electrode head with the fixing ring.
(Preferably use REGEN C-NOVES own thin cotton pads)
Distribute toner, gel or serum evenly on the cotton pad or on your face before using the intended
function.
How to use REGEN C-NOVE
Remove all jewelery, including piercing.
Clean your skin from make up residues and impurities with water and mild soap.
Prepare a cotton pad and attach it to the electrode head using the fixing ring.
Apply toner or gel. Use water-soluble facial products and avoid strong soaps or scrubbing lotions.
Long press MODE button until the display lights up. Then select function. Adjust the strength.
Move the electrode head on your face and make sure that the entire surface of the electrode head
touches the skin. Move the device approximately 2cm per second in CLEAN/MOISTURE mode. Do not
hold the electrode head for more than 3 seconds in each area. If the skin feels warm, move the
electrode head to another area of the face.
NOTE! Do not use CLEAN/MOISTURE mode on or around your eyes.
During COOL mode, apply the device as if punching your skin: Press and hold. Lift and move. Press and
hold (repeat).
If you feel discomfort or skin irritation after using the device, stop using the device.
After treatment, you can use moisturizing cream or your favourite anti-wrinkle cream.
Clean the electrode head with a slightly damp piece of cloth.
Excessive use of the device may damage the skin.
Do not look directly at the LED light to avoid eye irritation. Close your eyes when treating the area
around your eyes.
