REGEN BLUE
4
How to use REGEN BLUE
Remove all jewelry, including piercing.
Clean your skin from makeup residues and impurities with water and mild soap.
Do NOT use any lotion or skin care products when using the LED-light device.
Long press switch button to start the device. The blue LED lights are promptly activated.
Lightly press the light-source on your skin. Massage the skin according to the illustrations below.
Do not use LED-light more than 30 seconds in each area.
Do not look directly at the LED light in order to avoid eye irritation. Close your eyes when treating the
area around your eyes.
Use the device twice a week for 10 minutes each time.
The device will automatically turn off after 10 minutes. If you need to use the device for a longer time,
press the switch button to boot the device again.
Improvements of skin problems are usually visible after 6-8 weeks of use.
If you feel discomfort or skin irritation after using the device, stop using the device immediately.
The skin permeability is increased after use of blue LED-light, and we recommend you to use a
moisturizing cream or your favourite anti-wrinkle cream after treatment.
Excessive use of the device may damage the skin.
1-
Gently move the LED-light
device along the jaw towards
your ear.
2-
With circular motions, move
the LED-light
device from the
top of your cheek
downwards.
3-
On your forehead, move the
device horizontally from side
to side.
Power Supply Instruction
Charge the device fully before its first use.
Only use the product's original DC-cable for charging.
Insert the DC-cable into the charging socket on REGEN BLUE.
Connect the USB side into a USB charger, for example your phone charger or computer. It takes
approximately 2 hours to charge the device completely.