1. Application & Features.
1) Application
This rear cover disassembly jig is produced for the purpose
of disassembling the outer cover of smartphone.
2) Features
(1) This product is designed to be used easily.
(2) To easily disassemble targed phone, time and temperature
can be controlledprecisely.
(3) Quick operation is available by heat conservation(WARM).
(4) Safety circuit is adopted to protect the product against
over-voltage and over heating.
2. Installation.
1)
This product is produced to work well at normal rated volta
-ge(/free-voltage). Before installation of product,check
whether label on product meets well your working voltage.
2) Please install the product at the strong and flat place.
3) Please make space of more than 10cm from the product to
the left,right, top,down environments for installation.
4) Please do not install the product at the place near to the heat
sources or direct sunlight.
5) The product must be be used indoors, recommended to be
used under +10℃~+40℃ of environmental temperature.
* According to outside temperature, temperature tolerance at
heating portion may happen.
3. Warnings.
1)
Do not touch power cable & electric parts by wet hands.
2)
Do not operate the product with explosive or volatile matter
like battery, fiber, paper, alcohol, benzene etc and chemicals.
3) Please do not place volatile matters near to the product.
4) Please take caution without fire burns in taking out phone.
5) If you heat up a phone for a long time, deformation or
decoloration may happen. (Not for more than 10min at 80℃)
6) Other applications except for smartphone disassembly is
prohibited.
4. How to operate.
1)
Operation steps
(1)
Please connect power cable.
(2)
Please turn on power switch at the front of product.
(3)
Heat conservation(WARM) automatically activates
and green LED turns on. Factory setting is 50℃.
(4)
Place smartphone whose rear cover which should be
disassembled to face the heating plate (in orange color)
(5)
When you try to start heating, push “HEAT ON” at
the front panel.
- Basic setting temperature: 80℃, time: 5min.
- When temperature reaches target temperature,
“beep” sound alarms.
- Heating stays during setting time(5min), after elapsing
setting time, another “beep” sound alarms to remind
heating completion and heat conservation activates.
※ During working, if you want to stop working, push
“HEAT” button, then working stops, heat conservation
activates.
(6)
After heating is finished, please wear protective glove
and place smartphone upside down whose rear cover
which should be disassembled to face upward.
www.regeni.com -2-
www.regeni.com -3-