To deactivate 45 rpm press the button again and the L.E.D will return to
red, re-selecting 33 rpm, (
NOTE:
When changing between speeds,
please do not adjust the belt drive from 33rpm on your P5!)
When changing speed from 33 to 45 RPM on the P5 60Hz up grade sup-
ply we suggest you observe the following:
It is advised to turn power supply & turntable on with 33 RPM selected on
the power supply, and then selecting 45 RPM using the speed control
switch on the power supply unit.
We suggest you avoid selecting 45 RPM on the speed switch on the
power supply box and then turning the TT PSU or turntable power switch
on, this could under some circumstances cause the motor to stall and the
turntable may not reach the correct operating speed of 45 RPM.
When using the P5 it is still possible to turn the turntable off using the
switch on the turntable, this is perfectly ok for short periods of non use,
but for longer periods of non use it is advisable to turn the TT PSU off as
well (see Setup - getting started section for information on the P5 60Hz
(USA) TT PSU)
TT PSU MANUAL.qxd 03/08/2004 14:43 Page 4