DEFAULT CONFIGURATION IN TRACKSO IOT GATEW AY
Protocol: 4 (Sunspec)
Inverter ID: 1 (Range: 1 to 247)
Baud Rate:9600, (57600.115200)
Data Bits: 8
Stop Bit: 1
Parity: N/A (None)
If Entry of the password required for the modification of parameters. The customer password is 72555
CONFIGURATION AT THE INVERTER END
Enter into RS485 Config section in following way and check all the required settings
SETTING THE PROTOCOL
Set the protocol to 4 (Sunspec)
SETTING THE BAUD RATE
Set the baud rate to 9600
SETTING THE INVERTER ID
Set the Inverter ID to 1
COMMUNICATION CARD SETTINGS
Single Inverter
