10
REFUsol 08K ... 23K
REFU Elektronik GmbH
2.4
Protection against Contact with Electrical Parts
DANGER
Danger to life, danger of injury due to high electrical voltage
Installation of the inverter must only be carried out by trained specialist
personnel. In addition, the installer must be accredited by the responsible
utility company.
General assembly and safety stipulations relating to working on high current
facilities must be followed.
Before switching on, a check must be made to ensure that the plugs are firmly
in place (locked).
Before plugging or unplugging the DC plug, always disconnect the connection
to the PV generator.
The feeder must be isolated and secured against being switched on again
before working at the AC grid.
2.5
Protection against Contact with Hot Parts
CAUTION
Danger of burns caused by hot surfaces on housings
At an ambient temperature of 45 °C, the upper part of the housing as well as the
refrigeration unit can reach a surface temperature of more than 75 °C.
Do not touch the housing surface near to heat sources.
Allow the device to cool down for 15 minutes before touching the surface of
the device.
