1.1
Head up
⑴
Press and hold
HEAD UP button of remote, head actuator moves out, stop when
released
;
1.2
Head down
⑶
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released
;
1.3
Foot up
⑵
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.4
foot down
⑷
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released
;
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
1.5
Flat
⑸
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat
;
1.6
Memory position
⑥
Click memory position to move the actuator to the memory position.
FCC
:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
2
/
3